Dingo Snatch block DSB22 for winch 12000lbs 13000lbs from 9500lbs George4x4
dingo snatch block with Narrow Tree Saver and winch rope
dingo snatch block on front recovery point shackle
Dingo snatch Block with soft shackle 4WD Winch Pulley George4x4 recovery gear
Dingo snatch Block  with steel shackle 3.2ton 4WD Winch Pulley George4x4 recovery gear  dingo snatch block on a towing truck with steel cable
dingo snatch block in testing line control George4x4 recovery gear
Dingo snatch Block 4WD Winch Pulley George4x4 recovery gear
dingo snatch block with soft shackle
DSB22 Dingo Snatch Block | MBS 22T |Compact Strong & Soft-Shackle Ready
Dingo snatch Block with steel shackle 4WD Winch Pulley George4x4 recovery gear
Dingo snatch Block with tow rope Extension Rope 4WD Winch Pulley George4x4 recovery gear
Dingo snatch Block opened 4WD Winch Pulley George4x4 recovery gear
Dingo snatch Block with steel shackle in action 4WD Winch Pulley George4x4 recovery gear
DSB22 Dingo Snatch Block | MBS 22T |Compact Strong & Soft-Shackle Ready
Dingo Snatch Block --DSB22
George4x4 Dingo Snatch Block –4WD Recovery Pulley Block (22T Rated)

DSB22-A: Aluminum wheel designed exclusively for fiber rope. weight 1.65kg

TESED DSB22-S: steel wheel, weight 2.15kg; Compatible with both soft rope and steel cable, but do not use with fiber rope if it has been used with steel cable, as this may cause damage to the fiber.
Dingo Snatch Block --DSB22
George4x4 Dingo Snatch Block –4WD Recovery Pulley Block (22T Rated)

DSB22-A: Aluminum wheel designed exclusively for fiber rope. weight 1.65kg

DSB22-S: steel wheel, weight 2.15kg; Compatible with both soft rope and steel cable, but do not use with fiber rope if it has been used with steel cable, as this may cause damage to the fiber.
DSB22 Dingo Snatch Block | MBS 22T |Compact Strong & Soft-Shackle Ready
Dingo Snatch Block --DSB22
George4x4 Dingo Snatch Block –4WD Recovery Pulley Block (22T Rated)

DSB22-A: Aluminum wheel designed exclusively for fiber rope. weight 1.65kg

DSB22-S: steel wheel, weight 2.15kg; Compatible with both soft rope and steel cable, but do not use with fiber rope if it has been used with steel cable, as this may cause damage to the fiber.
Dingo snatch Block in action 4WD Winch Pulley George4x4 recovery gear
Dingo snatch Block 4WD Winch Pulley George4x4 recovery gear
Narrow Tree Trunk Protector –60mm | Dingo Block Ready | MBS 16,000KG George4x4 recovery gear winch system with dingo snatch block
DSB22 Dingo Snatch Block | MBS 22T |Compact Strong & Soft-Shackle Ready
dingo snatch block with front recovery point and steel rated shackle

DSB22 Dingo Snatch Block | MBS 22T |Compact Strong & Soft-Shackle Ready

Regular price
$79.00
Sale price
From $79.00
Tax included. Shipping calculated at checkout.

Dingo Snatch Block — DSB22  

Predictable rope control when load and angles change — no flip-out, no slip-out.

Quick Answers

• Rotating wheel Reduces friction & Heat on long Pulls
• Designed & Tested in Australia for real Recoveries.  

*Direct connection to recovery points (size permitting)

*Direct connection to our NARROW TREE TRUNK Protector

*Direct connection to steel shackles

   Compatibility: Synthetic rope & soft shackles (steel cable via DSB22-S)

Rating: 22T MBL — suits most 8,000–13,500 lb winches

 


Real recoveries aren’t always straight or perfectly set up.

When load builds and releases, and angles shift under tension, rope behaviour becomes harder to control.

The Dingo Block was designed to keep the line contained and predictable in those moments — helping prevent flip-out and reducing unnecessary heat during long or slow winch pulls.

“What our customers say”
• “No more rope flip-out in tricky angles”  
• “Smooth pulls even during load changes”

dingo snatch block

Why choose the Dingo Block?

• Lighter than traditional steel snatch blocks
• More controlled than basic winch rings
• Rotating wheel design for smoother line movement
• Soft-shackle friendly with no sharp rope contact edges
• Compact, solid, built for real-world use

Reduced Heat on Long Pulls

Unlike static winch rings that rely on friction, the Dingo Block uses a rotating wheel system.

The wheel turns with the rope, supported by a greased bush bearing between the wheel and load pin.
This reduces friction build-up and helps keep temperatures lower during long or repeated pulls — protecting your synthetic rope over time.

Compatibility

DSB22-A (Aluminium Wheel)
Designed exclusively for synthetic fibre rope.
Weight: 1.65kg

DSB22-S (Steel Wheel)
Suitable for steel cable and soft rope.
Weight: 2.15kg

⚠ Do not switch back to synthetic rope after using steel cable, as embedded particles may damage fibre rope.


Built for Real Recoveries

The Dingo Block isn’t showroom gear.

It’s built for recoveries where:
• Angles aren’t ideal
• Load cycles on and off
• Rope doesn’t sit perfectly

That’s when controlled rope behaviour matters most.

-------------------------------------------------------------

Quick Answers

✔ Works with synthetic rope & soft/steel shackles
✔ 22T MBS ( Tested 24ton)
✔ Rotating wheel reduces friction & heat
✔ Helps prevent rope slip-out under changing load
✔ Designed & tested in Australia

--------------------------------------------------------------------

 

Frequently Asked Questions – George4x4 Dingo Block


What makes it different from a winch ring?

Winch rings rely on friction.
The Dingo Block rotates with the rope, helping reduce heat build-up and keeping the line more contained when angles change.


Is it soft shackle friendly?

Yes. The load pin design and rope contact surfaces are smooth and designed for synthetic setups.


Is it suitable for heavy vehicles?

Rated at 22T MBS, suitable for most 8,000–13,500 lb winches.
Larger models available for heavy-duty trucks.

 

  • Dingo snatch Block with steel shackle in action 4WD Winch Pulley George4x4 recovery gear


Practical recovery details

  • Safety wire on load pin – allows attachment of a safety rope if required

  • Lightweight design

    • 1.66 kg (fiber rope version)

    • 2.15 kg (steel cable version)


 


⚙️ Specs:

Specification Detail
Model Dingo Snatch Block (DSB22-A & DSB22-S)
Material Aluminium Alloy + Steel Wheel + Steel walls 
Minimum Breaking Strength (MBS) 22,000 kg ( TESTED 24000kg)
Weight 1.66 kg (for fibre rope) / 2.15 kg ( for steel cable)
Finish coating Orange
Compatible With Soft shackles, fibre or steel winch rope
Includes Load pin with eye bolt 

 

Built for predictable rope control.
Designed and tested in Australia.
Ready for real-world winching.